UB Information Technology

Wireless Access: UB_Secure

Create an Intel PROSet profile for UB_Secure

If Intel PROSet Wireless does not appear in your program list, follow the directions for configuring the Windows XP Wireless manager or the Windows Vista Wireless manager.

If UB_Secure appears in your Found Networks list, highlight UB_Secure and click Connect. Follow the prompts to create a profile using the values found in the following steps.

1. Select Start, then All Programs. Select Intel PROSet Wireless.Click Profiles.
   
2. In the Profiles window, click Add.
   
3. Select General Settings from the left menu and enter UB_Secure (including caps as displayed) for the Profile Name and the SSID. Make sure Network is chosen as the operating mode. Click Next.

4. Select Security Settings from the left menu. Use the pull down menus to select
   WPA2-Enterprise
   for Network Authentication, AES-CCMP for Data Encryption, and PEAP for Authentication Type. For PEAP User, select MS-CHAP-V2 for Authentication Protocol and Prompt each time I connect for User Credentials. Make sure Roaming Identity is left blank. Click Cisco Options.
   
5. (Optional) Check Enable Cisco Compatible Extensions; Enable Radio Management Support should be pre-selected. Check Allow Fast Roaming (CCKM). Click OK then Click Next in the Security Setting window.
   
6. For PEAP Server select Validate Server Certificate. Click OK.
   
7. Highlight UB_Secure and use the arrows on the right side of the Profiles window to move UB_Secure to the top of the list. Click Connect.



8. Enter your UBITName and password. Leave blank Roaming Identity and Domain. Click OK.